{"product_id":"zaptec-go-2-22kw-asphalt-black","title":"Zaptec Go 2 Asphalt Black – 22 kW wallbox with MID-certified meter and 4G","description":"\u003cp\u003eThe Zaptec Go 2 is a compact 22 kW wallbox with a Type 2 socket, MID-certified meter and display. Its meter measures in both directions – so it is already prepared for bidirectional charging (V2X). It is always online via Wi-Fi and 4G, switches automatically between 1- and 3-phase charging and, at 239 × 178 mm, is smaller than a sheet of A4. The MID meter makes it the right choice if you need to document the charging electricity for your company car.\u003c\/p\u003e\n\u003cp\u003eThe Go 2 comes in three versions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWallbox:\u003c\/strong\u003e the Go 2 on its own – if you already have a Type 2 cable and your house connection is sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV set with Zaptec Sense 65 A:\u003c\/strong\u003e Sense measures in the meter cabinet how much power your home is using right now and continuously adjusts the charging power to match. This enables dynamic load management, dimming under §14a EnWG and, in Germany, solar surplus charging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Type 2 charging cable:\u003c\/strong\u003e the Go 2 together with the Weidmüller Type 2 charging cable, 32 A, 22 kW, 5 m long.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003eup to 22 kW (3-phase, 32 A), 7.4 kW 1-phase, automatic phase switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection to the car\u003c\/th\u003e\n\u003ctd\u003eType 2 socket, charging cable can be locked permanently; charging cable only included in the version with charging cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eMID class B, bidirectional, with display, not Eichrecht-compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBidirectional\u003c\/th\u003e\n\u003ctd\u003eV2X-ready: enabled via software update, according to Zaptec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eISO 15118\u003c\/th\u003e\n\u003ctd\u003eHardware built in at the factory, no add-on module needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad management\u003c\/th\u003e\n\u003ctd\u003edynamic with Zaptec Sense 65 A – included in the PV set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003e4G (SIM built in) and Wi-Fi, Bluetooth for setup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e5-year manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eA good fit if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou charge a company car at home and want to document the kilowatt hours,\u003c\/li\u003e\n\u003cli\u003eyou want to buy today and charge bidirectionally later without replacing the wallbox,\u003c\/li\u003e\n\u003cli\u003eyou are looking for a small wallbox that can also be mounted outdoors,\u003c\/li\u003e\n\u003cli\u003ethere is no reliable Wi-Fi at your parking space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProbably not, if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou bill charging electricity to others or a third party settles between two parties – then you need an Eichrecht-compliant wallbox,\u003c\/li\u003e\n\u003cli\u003eyou want a cable that is permanently attached at the factory – on the Go 2, however, you can lock your charging cable permanently,\u003c\/li\u003e\n\u003cli\u003eyou are installing in Austria – we do not offer the Go 2 there because of OVE R 37.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it can do\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady for V2X:\u003c\/strong\u003e The MID meter measures energy in both directions. Zaptec intends to enable bidirectional charging (V2G\/V2H) via a software update once the standards and rules are clear – your car must support it too.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO 15118 built in:\u003c\/strong\u003e The hardware for communicating with the car in line with ISO 15118 is built in at the factory – you do not need an add-on module. According to Zaptec, ISO 15118-20 comes from 1 January 2027 via a free firmware update.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic phase switching:\u003c\/strong\u003e The Go 2 switches between 1- and 3-phase charging by itself. That way it also charges cleanly at low power, for example with solar power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise metering:\u003c\/strong\u003e MID-certified meter; you read the count directly on the display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlways online:\u003c\/strong\u003e SIM built in at the factory, plus Wi-Fi – app and updates stay current, even without Wi-Fi at the parking space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmaller than a sheet of A4:\u003c\/strong\u003e 239 × 178 × 73 mm and only 1.6 kg, with a built-in spirit level for installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour design:\u003c\/strong\u003e The front cover can be swapped; Zaptec offers six colours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen to energy managers:\u003c\/strong\u003e According to Zaptec, the Go 2 can be integrated into third-party systems such as Solarmanager, Powerfox or CleverPV.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSharing power:\u003c\/strong\u003e up to three Go 2 per installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking the cable permanently:\u003c\/strong\u003e Your external Type 2 charging cable can be locked permanently to the station. It then stays on the wallbox like a fixed cable and is protected against theft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust:\u003c\/strong\u003e IP54, IK10, −30 to +50 °C, DC residual current protection built in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGood to know\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBidirectional charging:\u003c\/strong\u003e Zaptec has not yet named a date for enabling it in Austria and Germany. Your vehicle manufacturer can tell you whether your car supports V2X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNew installations from 2027:\u003c\/strong\u003e According to Zaptec, the Go 2 is ready from 1 January 2027: the hardware for ISO 15118 is built in at the factory, ISO 15118-20 comes via a free firmware update.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad management, §14a and solar:\u003c\/strong\u003e Dynamic load management and dimming under §14a EnWG are available with Zaptec Sense – the PV set includes Sense 65 A. Zaptec currently offers solar surplus charging via Sense in Germany, the Netherlands, Belgium, Switzerland and Luxembourg, for home installations on TN grids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZaptec Sense in the PV set:\u003c\/strong\u003e for house connections up to 65 A, installed in the meter cabinet by your electrician. If Sense loses its internet connection, the wallbox keeps charging at the minimum power of 6 A until Sense is back online.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22 kW:\u003c\/strong\u003e Registration with the grid operator and, as a rule, its approval are required. Your electrician takes care of that.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn site:\u003c\/strong\u003e Circuit breaker and RCD according to local regulations; thanks to the built-in DC residual current detection, a type A RCD is usually sufficient. Installation by an electrician.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan the Go 2 charge bidirectionally?\u003c\/h3\u003e\u003cp\u003eThe hardware is prepared and the MID meter measures in both directions. According to Zaptec, V2X will be enabled via a software update once the standards and rules are clear. Your car must support bidirectional charging as well.\u003c\/p\u003e\n\u003ch3\u003eIs MID enough for billing my employer?\u003c\/h3\u003e\u003cp\u003eAs a rule, yes. Some employers or fleet providers still require Eichrecht – it is best to ask beforehand.\u003c\/p\u003e\n\u003ch3\u003eDo I need Wi-Fi?\u003c\/h3\u003e\u003cp\u003eNo. The Go 2 has 4G built in and gets online without Wi-Fi too.\u003c\/p\u003e\n\u003ch3\u003eWhich charging cable do I need?\u003c\/h3\u003e\u003cp\u003eA Type 2 cable rated for 32 A so you can use the full 22 kW. The version with charging cable already includes the Weidmüller Type 2 charging cable (5 m, 22 kW).\u003c\/p\u003e\n\u003ch3\u003eWhere is Zaptec Sense installed?\u003c\/h3\u003e\u003cp\u003eIn the meter cabinet or distribution board, indoors. Your electrician takes care of it. Sense 65 A is only included in the PV set.\u003c\/p\u003e\n\u003ch3\u003eHow long does a charge take?\u003c\/h3\u003e\u003cp\u003eAt 22 kW, a car with a 60 kWh battery is full in around three hours, provided it can charge at 22 kW AC.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e900-00120 (wallbox), in the PV set additionally 900-00026 (Sense 65 A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e7090038510575 (wallbox)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003e22 kW at 32 A 3-phase (TN grid), 7.4 kW at 32 A 1-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePhase switching\u003c\/th\u003e\n\u003ctd\u003eautomatic, 1- and 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrid\u003c\/th\u003e\n\u003ctd\u003eTN, IT, TT; 230\/400 V AC ±10 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVehicle connection\u003c\/th\u003e\n\u003ctd\u003eType 2 socket (IEC 62196-2), electronic lock, charging cable can be locked permanently\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eMID class B (EN 50470-1\/-3), bidirectional metering, display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBidirectional charging\u003c\/th\u003e\n\u003ctd\u003eprepared (V2G\/V2H), enabled via software update according to Zaptec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCommunication\u003c\/th\u003e\n\u003ctd\u003e4G LTE Cat 1, Wi-Fi 2.4 GHz, Bluetooth LE 4.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eOCPP 1.6J, API, webhooks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID 13.56 MHz (MIFARE Classic, DESFire), app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eRDC-DD 6 mA DC to IEC 62955\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eISO 15118\u003c\/th\u003e\n\u003ctd\u003eHardware built in at the factory; ISO 15118-20 from 1 January 2027 via firmware update, according to Zaptec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection rating\u003c\/th\u003e\n\u003ctd\u003eIP54, IK10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e−30 to +50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions \/ weight\u003c\/th\u003e\n\u003ctd\u003e239 × 178 × 73 mm, 1.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eZaptec Sense 65 A (PV set only)\u003c\/th\u003e\n\u003ctd\u003e3-phase, inline, max. 65 A; Wi-Fi 2.4 GHz or Ethernet; indoor installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging cable (version with charging cable only)\u003c\/th\u003e\n\u003ctd\u003eWeidmüller, Type 2, 32 A, 22 kW, 5 m, smooth, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e5-year manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eScope of delivery, downloads and accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScope of delivery, wallbox: Zaptec Go 2 Asphalt Black. Charging cable not included.\u003c\/li\u003e\n\u003cli\u003eScope of delivery, PV set: 1× Zaptec Go 2 Asphalt Black, 1× Zaptec Sense 65 A (3-phase, inline, max. 65 A). Charging cable not included.\u003c\/li\u003e\n\u003cli\u003eScope of delivery, with charging cable: 1× Zaptec Go 2 Asphalt Black, 1× Weidmüller Type 2 charging cable (32 A, 22 kW, 5 m).\u003c\/li\u003e\n\u003cli\u003eDownloads: \u003ca href=\"https:\/\/help.zaptec.com\/hc\/article_attachments\/36068734621841\" target=\"_blank\" rel=\"noopener\"\u003eZaptec Go 2 data sheet\u003c\/a\u003e, \u003ca href=\"https:\/\/help.zaptec.com\/hc\/article_attachments\/26412314597777\" target=\"_blank\" rel=\"noopener\"\u003eZaptec Sense data sheet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAccessories: \u003ca href=\"\/en-de\/products\/ladekabel-typ-2-32a-22kw-5m-glatt-schwarz-weidmuller\"\u003eWeidmüller Type 2 charging cable\u003c\/a\u003e, 5 m, 22 kW, also available separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zaptec","offers":[{"title":"Wallbox","offer_id":64205522927946,"sku":"1234","price":809.0,"currency_code":"EUR","in_stock":true},{"title":"PV set with Zaptec Sense 65 A","offer_id":64313135661386,"sku":"1257","price":1069.0,"currency_code":"EUR","in_stock":true},{"title":"With Type 2 charging cable (5 m, 22 kW)","offer_id":64313135694154,"sku":null,"price":949.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3623\/0218\/files\/Zaptec_Go-2_Front_AsphaltBlack.webp?v=1793707332","url":"https:\/\/e-leiwand.at\/en-de\/products\/zaptec-go-2-22kw-asphalt-black","provider":"e-leiwand","version":"1.0","type":"link"}