{"title":"Professional wallboxes","description":"\u003cp\u003eEichrecht-compliant wallboxes meet the requirements of \u003cstrong\u003eweights and measures law in Austria and Germany\u003c\/strong\u003e. Electricity is \u003cstrong\u003emeasured precisely and billed transparently\u003c\/strong\u003e – just like at a fuel pump.\u003c\/p\u003e\n\u003cp\u003eCharging data is stored with a digital signature, so it is always traceable \u003cstrong\u003ehow much energy was actually charged\u003c\/strong\u003e. You need this as soon as you bill charging power to others – such as tenants, guests or employees. For company-car reimbursement, a wallbox with an MID meter is usually sufficient.\u003c\/p\u003e","products":[{"product_id":"ebox-professional-socket-eka","title":"Compleo eBOX professional socket EKA – Eichrecht-compliant 22 kW wallbox with Type 2 socket","description":"\u003cp\u003eThe Compleo eBOX professional socket EKA is a 22 kW wallbox compliant with Austrian and German calibration law (Eichrecht) for charging points where electricity is billed: hotel car parks, company premises, residential complexes, restaurants. The Type 2 socket suits any vehicle with its own cable, while Plug \u0026amp; Charge to ISO 15118-2 (from firmware 3.x) and a free choice of SIM make it ready for semi-public charging.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003eup to 22 kW (32 A, 1–3 phases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection to the car\u003c\/th\u003e\n\u003ctd\u003eType 2 socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003ecompliant with Austrian and German calibration law (Eichrecht) (MID class A, signed meter readings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eLAN, Wi-Fi, mobile network with your own mini SIM (anySIM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging communication\u003c\/th\u003e\n\u003ctd\u003eISO 15118-2, Plug \u0026amp; Charge from firmware 3.x (with a compatible backend)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID, Plug \u0026amp; Charge (from firmware 3.x), backend (OCPP 1.6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight for you if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou want to resell charging power to guests, tenants, co-owners, customers or employees for their private cars,\u003c\/li\u003e\n\u003cli\u003edifferent vehicles with their own cables charge at your charging point,\u003c\/li\u003e\n\u003cli\u003eyou want a free choice of backend and mobile contract.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProbably not for you if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou only need to document your own costs, for example for your employer's company car charging reimbursement – then MID is enough, for example the eBOX professional cable MID,\u003c\/li\u003e\n\u003cli\u003eguests arrive without their own cable – then go for the cable EKA with a fixed cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it can do\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEichrecht-compliant billing:\u003c\/strong\u003e Eichrecht-compliant metering with signed meter readings (OCMF) – the prerequisite for being allowed to resell charging power to others, in Austria and Germany alike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree choice of SIM and backend:\u003c\/strong\u003e mini SIM slot (anySIM) for any mobile contract, plus LAN and Wi-Fi; OCPP 1.6 for common OCPP backends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging without a card:\u003c\/strong\u003e cars with Plug \u0026amp; Charge to ISO 15118-2 log in automatically when plugged in (from firmware 3.x, with a compatible backend); all others via RFID or backend.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeveral charging points on the same connection:\u003c\/strong\u003e load balancing between several eBOXes on the local network without additional hardware; dynamic and with solar surplus via a Modbus TCP smart meter (e.g. Siemens PAC2200, Shelly Pro 3EM) or an energy management system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for continuous operation:\u003c\/strong\u003e IP55 and IK10, operation from −30 to +50 °C, DC fault current detection built in, LED light ring showing the charging status.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGood to know\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBilling:\u003c\/strong\u003e Eichrecht-compliant metering is one half, billing is the other. For that you need a backend – we offer Smartfuelpass by Ultima Payments or Vaylens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup:\u003c\/strong\u003e reliable via LAN and the WebConfig browser interface; the eConfig app now only works to a limited extent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTo be provided on site:\u003c\/strong\u003e Type A RCD (40 A \/ 30 mA) and C40 miniature circuit breaker. 22 kW usually requires the grid operator's approval.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I really need the Eichrecht-compliant version?\u003c\/h3\u003e\u003cp\u003eYes, as soon as you resell charging power to others – tenants, co-owners, hotel guests, customers or employees for their private cars – in Austria and Germany alike. For company car charging reimbursement for your own company car, MID is enough.\u003c\/p\u003e\n\u003ch3\u003eWho bills the charging sessions?\u003c\/h3\u003e\u003cp\u003eA backend that processes the signed meter readings. If you like, we'll set up Smartfuelpass or Vaylens for you – write to us at onlinesales@ampion.at.\u003c\/p\u003e\n\u003ch3\u003eCan I run several eBOXes on one house connection?\u003c\/h3\u003e\u003cp\u003eYes. The eBOXes share the power among themselves on the local network, and with a smart meter also dynamically based on actual consumption.\u003c\/p\u003e\n\u003ch3\u003eDo I need a SIM card?\u003c\/h3\u003e\u003cp\u003eOnly if there's no LAN or Wi-Fi available at the charging point. In that case, you insert a mini SIM from your provider.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e12236113 (formerly i00021945)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e4068411000039\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003eup to 22 kW, 1–3 phases, max. 32 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eType 2 socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eMID class A, Eichrecht-compliant (AT, DE), OCMF-signed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCommunication\u003c\/th\u003e\n\u003ctd\u003eLAN, Wi-Fi, 2G\/4G with mini SIM (anySIM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eOCPP 1.6, Modbus TCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eISO 15118\u003c\/th\u003e\n\u003ctd\u003eISO 15118-2 (PLC built in), Plug \u0026amp; Charge from firmware 3.x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID, Plug \u0026amp; Charge (from firmware 3.x), backend (OCPP 1.6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad management\u003c\/th\u003e\n\u003ctd\u003eload balancing between eBOXes, dynamic with smart meter or EMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection\u003c\/th\u003e\n\u003ctd\u003e6 mA DC fault current detection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrid operator control\u003c\/th\u003e\n\u003ctd\u003eInterface for FNN control box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection rating\u003c\/th\u003e\n\u003ctd\u003eIP55, IK10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e−30 to +50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions \/ weight\u003c\/th\u003e\n\u003ctd\u003e450 × 180 × 170 mm incl. eCLICK, approx. 4.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eScope of delivery, downloads and accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScope of delivery: eBOX professional socket EKA, eCLICK (Eichrecht-compliant), mounting material, drilling template, operating instructions\u003c\/li\u003e\n\u003cli\u003eDownloads: \u003ca href=\"https:\/\/www.compleo-charging.com\/fileadmin\/Documentcenter\/eBOX_professional\/12236113__eBOX_prof_Compleo_datasheet_DE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet 12236113\u003c\/a\u003e, \u003ca href=\"https:\/\/youtu.be\/eQ0kbS07iAk\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video on YouTube\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAccessories: \u003ca href=\"\/en-it\/products\/ladekabel-typ-2-32a-22kw-5m-glatt-schwarz-weidmuller\"\u003eWeidmüller Type 2 charging cable\u003c\/a\u003e, 5 m, 22 kW – for guests without a cable · \u003ca href=\"\/en-it\/products\/epole\"\u003eePOLE stand\u003c\/a\u003e · \u003ca href=\"\/en-it\/products\/epole-duo\"\u003eePOLE DUO\u003c\/a\u003e for two charging stations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Compleo","offers":[{"title":"Default Title","offer_id":53071666184522,"sku":"1205","price":799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3623\/0218\/files\/eBOX_smart.png?v=1761987073"},{"product_id":"ebox-professional-cable-eka-anysim-22kw","title":"Compleo eBOX professional cable EKA – Eichrecht-compliant 22 kW wallbox with 6.5 m cable","description":"\u003cp\u003eThe Compleo eBOX professional cable EKA is a 22 kW wallbox compliant with Austrian and German calibration law (Eichrecht) with a permanently attached 6.5 m Type 2 cable – for charging points where nobody should have to unpack their own cable: hotels, restaurants, company and guest car parks. With a free choice of SIM, Plug \u0026amp; Charge to ISO 15118-2 (from firmware 3.x) and load balancing between several stations.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003eup to 22 kW (32 A, 1–3 phases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection to the car\u003c\/th\u003e\n\u003ctd\u003eType 2 cable, 6.5 m, permanently attached\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003ecompliant with Austrian and German calibration law (Eichrecht) (MID class A, signed meter readings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eLAN, Wi-Fi, mobile network with your own mini SIM (anySIM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging communication\u003c\/th\u003e\n\u003ctd\u003eISO 15118-2, Plug \u0026amp; Charge from firmware 3.x (with a compatible backend)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID, Plug \u0026amp; Charge (from firmware 3.x), backend (OCPP 1.6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight for you if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou resell charging power to guests, customers, tenants, co-owners or employees for their private cars,\u003c\/li\u003e\n\u003cli\u003eyour users should simply plug in without having to bring a cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProbably not for you if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou only need to document your own costs, for example for company car charging reimbursement – then the eBOX professional cable MID is enough,\u003c\/li\u003e\n\u003cli\u003edifferent vehicles are meant to charge with their own cables – then the socket EKA is more flexible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it can do\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEichrecht-compliant billing:\u003c\/strong\u003e Eichrecht-compliant metering with signed meter readings (OCMF) for reselling charging power to others, in Austria and Germany alike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug in and charge:\u003c\/strong\u003e 6.5 m cable permanently attached to the station – reaches whether you park forwards or in reverse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree choice of SIM and backend:\u003c\/strong\u003e mini SIM slot (anySIM), LAN, Wi-Fi; OCPP 1.6 for common OCPP backends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging without a card:\u003c\/strong\u003e Plug \u0026amp; Charge to ISO 15118-2 (from firmware 3.x, with a compatible backend) for cars that support it; otherwise RFID or backend.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeveral charging points on the same connection:\u003c\/strong\u003e load balancing between eBOXes without additional hardware, dynamic and with solar surplus via a smart meter (e.g. Siemens PAC2200, Shelly Pro 3EM) or an energy management system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust:\u003c\/strong\u003e IP55, IK10, −30 to +50 °C, DC fault current detection built in, LED light ring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGood to know\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBilling:\u003c\/strong\u003e For that you need a backend – we offer Smartfuelpass by Ultima Payments or Vaylens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup:\u003c\/strong\u003e via LAN and WebConfig in the browser; the eConfig app only works to a limited extent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTo be provided on site:\u003c\/strong\u003e Type A RCD (40 A \/ 30 mA) and C40 miniature circuit breaker; 22 kW usually with the grid operator's approval.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCable or socket – which is better for guests?\u003c\/h3\u003e\u003cp\u003eWith a fixed cable nobody has to bring their own; that's usually the better choice for hotels and restaurants.\u003c\/p\u003e\n\u003ch3\u003eWho bills the charging sessions?\u003c\/h3\u003e\u003cp\u003eA backend with Eichrecht-compliant processing, such as Smartfuelpass or Vaylens – we'll set it up for you on request.\u003c\/p\u003e\n\u003ch3\u003eCan I run several eBOXes on one house connection?\u003c\/h3\u003e\u003cp\u003eYes, with load balancing on the local network and, if you like, dynamically with a smart meter.\u003c\/p\u003e\n\u003ch3\u003eDo I need a SIM card?\u003c\/h3\u003e\u003cp\u003eOnly if there's no LAN or Wi-Fi at the charging point; then a mini SIM from your provider.\u003c\/p\u003e\n\u003ch3\u003eHow fast does a guest charge?\u003c\/h3\u003e\u003cp\u003eAt 22 kW, about 22 kWh go into the car in one hour – enough for a good 100 km – provided the car can charge at 22 kW AC. Most cars charge at 11 kW, in which case it's about half that.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e12236114 (formerly i00021946)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e4068411000046\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003eup to 22 kW, 1–3 phases, max. 32 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eType 2 cable, 6.5 m, permanently attached\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eMID class A, Eichrecht-compliant (AT, DE), OCMF-signed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCommunication\u003c\/th\u003e\n\u003ctd\u003eLAN, Wi-Fi, 2G\/4G with mini SIM (anySIM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eOCPP 1.6, Modbus TCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eISO 15118\u003c\/th\u003e\n\u003ctd\u003eISO 15118-2 (PLC built in), Plug \u0026amp; Charge from firmware 3.x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID, Plug \u0026amp; Charge (from firmware 3.x), backend (OCPP 1.6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection\u003c\/th\u003e\n\u003ctd\u003e6 mA DC fault current detection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrid operator control\u003c\/th\u003e\n\u003ctd\u003eInterface for FNN control box (§14a EnWG, Germany)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection rating\u003c\/th\u003e\n\u003ctd\u003eIP55, IK10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e−30 to +50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions \/ weight\u003c\/th\u003e\n\u003ctd\u003e450 × 180 × 170 mm incl. eCLICK, approx. 7.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eScope of delivery, downloads and accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScope of delivery: eBOX professional cable EKA, eCLICK (Eichrecht-compliant), mounting material, drilling template, operating instructions\u003c\/li\u003e\n\u003cli\u003eDownloads: \u003ca href=\"https:\/\/www.compleo-charging.com\/fileadmin\/Documentcenter\/eBOX_professional\/12236114__eBOX_prof_Compleo_datasheet_DE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet 12236114\u003c\/a\u003e, \u003ca href=\"https:\/\/youtu.be\/eQ0kbS07iAk\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video on YouTube\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAccessories: \u003ca href=\"\/en-it\/products\/epole\"\u003eePOLE stand\u003c\/a\u003e · \u003ca href=\"\/en-it\/products\/epole-duo\"\u003eePOLE DUO\u003c\/a\u003e for two charging stations · \u003ca href=\"\/en-it\/products\/ebox-folierung-verschiedene-designs-moglich\"\u003eeBOX design wrap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Compleo","offers":[{"title":"Default Title","offer_id":53071682306378,"sku":"1215","price":849.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3623\/0218\/files\/compleo-ebox-professional-cable-front.png?v=1792075458"},{"product_id":"ebox-professional-cable-22-kw-mid","title":"Compleo eBOX professional cable MID – 22 kW wallbox with 6.5 m cable and MID-certified meter","description":"\u003cp class=\"produkt-hinweis\"\u003e\u003cstrong\u003eComplete set: eBOX professional cable with eCLICK MID module – the eSMARTMETER MID meter is already clipped in; your electrician takes care of the wiring during installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Compleo eBOX professional cable MID is a 22 kW wallbox with a permanently attached 6.5 m Type 2 cable and an eCLICK MID module in which the eSMARTMETER MID meter is already clipped in – it is wired by your electrician during installation. It records every kilowatt hour you need to document for your company car or your company fleet – with the same professional technology as the Eichrecht-compliant models: Plug \u0026amp; Charge to ISO 15118-2 (from firmware 3.x), LAN, Wi-Fi and mobile network with your own SIM.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003eup to 22 kW (32 A, 1–3 phases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection to the car\u003c\/th\u003e\n\u003ctd\u003eType 2 cable, 6.5 m, permanently attached\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eeSMARTMETER MID meter clipped into the eCLICK module (wired during installation), not Eichrecht-compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eLAN, Wi-Fi, mobile network with your own mini SIM (anySIM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging communication\u003c\/th\u003e\n\u003ctd\u003eISO 15118-2, Plug \u0026amp; Charge from firmware 3.x (with a compatible backend)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID, Plug \u0026amp; Charge (from firmware 3.x), backend (OCPP 1.6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eRight for you if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou charge a company car at home and bill the kilowatt hours to your employer,\u003c\/li\u003e\n\u003cli\u003eyou charge company vehicles at your own site and need the consumption per vehicle,\u003c\/li\u003e\n\u003cli\u003eyou want professional connectivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProbably not for you if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou resell charging power to others – tenants, co-owners, guests, customers or employees for their private cars – in which case you need the eBOX professional cable EKA,\u003c\/li\u003e\n\u003cli\u003ein Austria a service provider handles the reimbursement and bills your employer – in which case you need the eBOX professional cable EKA,\u003c\/li\u003e\n\u003cli\u003eyour car only charges at 11 kW and you don't need mobile network\/Plug \u0026amp; Charge – in which case the SOLO smart cable with factory-fitted MID and built-in RCD is sufficient.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it can do\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMID meter included:\u003c\/strong\u003e the eSMARTMETER is already clipped into the eCLICK module; your electrician wires it during installation. It records consumption accurate to the kWh – the basis for cost reimbursement by your employer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEvery charge assigned:\u003c\/strong\u003e RFID card or backend assign each charging session to a vehicle or a person.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree choice of SIM and backend:\u003c\/strong\u003e mini SIM slot, LAN, Wi-Fi, OCPP 1.6 – fits your employer's fleet solutions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug in and charge:\u003c\/strong\u003e 6.5 m cable permanently attached to the station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple stations, PV surplus:\u003c\/strong\u003e load balancing between eBOXes without additional hardware, dynamically and with solar power via a Modbus TCP smart meter (e.g. Siemens PAC2200, Shelly Pro 3EM).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust:\u003c\/strong\u003e IP55, IK10, −30 to +50 °C, DC residual current detection built in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGood to know\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMID or Eichrecht:\u003c\/strong\u003e MID is sufficient if you document your own costs (company car cost reimbursement, your own company fleet). As soon as you resell charging power to others – tenants, co-owners, guests, customers or employees for their private cars – you need an Eichrecht-compliant wallbox (EKA\/ME).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTax (Austria):\u003c\/strong\u003e according to the BMF, reimbursement of the costs of charging a company car is tax-free if the energy charged is verifiably assigned to the vehicle – the MID meter and RFID provide this proof. For guidance only, not tax advice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn site:\u003c\/strong\u003e RCD type A and miniature circuit breaker; 22 kW usually requires the grid operator's approval.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup:\u003c\/strong\u003e reliably via LAN and the WebConfig browser interface; the eConfig app now only works to a limited extent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs MID sufficient for billing my employer?\u003c\/h3\u003e\u003cp\u003eAs a rule yes, an Eichrecht-compliant meter is not required for this. Some employers or fleet providers nevertheless require Eichrecht – it's best to ask beforehand.\u003c\/p\u003e\n\u003ch3\u003eWhere is the MID meter located?\u003c\/h3\u003e\u003cp\u003eThe eSMARTMETER is already clipped into the eBOX's eCLICK MID module; your electrician takes care of the wiring during installation, and the cable set is included.\u003c\/p\u003e\n\u003ch3\u003eDo I need a SIM card?\u003c\/h3\u003e\u003cp\u003eOnly if there is no LAN or Wi-Fi at the parking space.\u003c\/p\u003e\n\u003ch3\u003eCan I charge with PV surplus?\u003c\/h3\u003e\u003cp\u003eYes, with a Modbus TCP smart meter or an energy management system.\u003c\/p\u003e\n\u003ch3\u003eHow long does a charge take?\u003c\/h3\u003e\u003cp\u003eAt 11 kW around six hours for 60 kWh, at 22 kW around three – provided the car can charge at 22 kW AC.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e12236112 (formerly i00021944)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEAN (wallbox)\u003c\/th\u003e\n\u003ctd\u003e4068411000022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003eup to 22 kW, 1–3 phases, max. 32 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eType 2 cable, 6.5 m, permanently attached\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eeSMARTMETER, MID (clipped into the eCLICK module)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCommunication\u003c\/th\u003e\n\u003ctd\u003eLAN, Wi-Fi, 2G\/4G with mini SIM (anySIM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eOCPP 1.6, Modbus TCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eISO 15118\u003c\/th\u003e\n\u003ctd\u003eISO 15118-2 (PLC built in), Plug \u0026amp; Charge from firmware 3.x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID, Plug \u0026amp; Charge (from firmware 3.x), backend (OCPP 1.6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eDC residual current detection 6 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrid operator control\u003c\/th\u003e\n\u003ctd\u003eInterface for FNN control box (§14a EnWG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection rating\u003c\/th\u003e\n\u003ctd\u003eIP55, IK10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e−30 to +50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions \/ weight\u003c\/th\u003e\n\u003ctd\u003e450 × 180 × 170 mm, approx. 6.4 kg plus 0.4 kg meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eScope of delivery, downloads and accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScope of delivery: eBOX professional cable, eCLICK MID module with clipped-in eSMARTMETER (MID meter) incl. cable set, mounting material, drilling template, operating instructions\u003c\/li\u003e\n\u003cli\u003eDownloads: \u003ca href=\"https:\/\/www.compleo-charging.com\/fileadmin\/Documentcenter\/eBOX_professional\/12236112__eBOX_prof_Compleo_datasheet_DE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eData sheet 12236112\u003c\/a\u003e, \u003ca href=\"https:\/\/www.compleo-charging.com\/fileadmin\/Documentcenter\/eSMARTMETER\/DE_Datenblatt_eSMARTMETER_i00021678_20240214.pdf\" target=\"_blank\" rel=\"noopener\"\u003eData sheet eSMARTMETER\u003c\/a\u003e, \u003ca href=\"https:\/\/youtu.be\/eQ0kbS07iAk\" target=\"_blank\" rel=\"noopener\"\u003eInstallation video on YouTube\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAccessories: \u003ca href=\"\/en-it\/products\/epole\"\u003eePOLE pedestal\u003c\/a\u003e · \u003ca href=\"\/en-it\/products\/ebox-folierung-verschiedene-designs-moglich\"\u003eeBOX design wrap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Compleo","offers":[{"title":"Titolo predefinito","offer_id":53237951627594,"sku":"1212","price":699.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3623\/0218\/files\/compleo-ebox-professional-cable-front.png?v=1792075458"},{"product_id":"keba-p30-green-xseries-6m-kabel-me-4g-rfid-122117","title":"KEBA P30 x-series Green Edition 22 kW – Eichrecht-compliant, 6 m cable","description":"\u003cp\u003eThe KEBA KeContact P30 x-series Green Edition is an Eichrecht-compliant 22 kW wallbox for businesses, residential complexes and anyone who wants to control several charging points together. Manufactured in Linz as the Green Edition – according to KEBA a climate-friendly charging solution from CO₂-optimised production –, with a 6 m Type 2 cable, RFID, LAN, Wi-Fi and LTE and built-in load management for up to 16 charging points.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003eup to 22 kW (10–32 A, single- or three-phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection to the car\u003c\/th\u003e\n\u003ctd\u003eType 2 cable, 6 m, permanently attached\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eEichrecht-compliant (ME) in Austria and Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eLAN, Wi-Fi, LTE with mini SIM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad management\u003c\/th\u003e\n\u003ctd\u003ex-series controls up to 15 KEBA c-series – 16 charging points without an additional device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePV surplus\u003c\/th\u003e\n\u003ctd\u003ewith KEBA KeContact E10 as a PV wallbox without separate energy management, with S10 incl. automatic 1-\/3-phase switching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSpecial feature\u003c\/th\u003e\n\u003ctd\u003eGreen Edition from Linz: according to KEBA climate-friendly, from CO₂-optimised production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eRight for you if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou resell charging power to tenants, co-owners, guests, customers or employees for their private cars,\u003c\/li\u003e\n\u003cli\u003eyou want to operate several charging points on one connection,\u003c\/li\u003e\n\u003cli\u003ea climate-friendly charging solution from Austria matters to you (Green Edition).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProbably not for you if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou only charge privately without billing – then you pay for features you don't need.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it can do\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEichrecht-compliant billing:\u003c\/strong\u003e Eichrecht-compliant metering (ME) in accordance with Austrian and German measurement and calibration law (Eichrecht).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeveral charging points without an additional device:\u003c\/strong\u003e one x-series as master controls up to 15 KEBA c-series – the charging points share an adjustable maximum power, keeping the house connection within its limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully connected:\u003c\/strong\u003e LAN (RJ45 and LSA+), Wi-Fi and LTE with your own mini SIM; OCPP 1.5 and 1.6 for common OCPP backends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled access:\u003c\/strong\u003e RFID reader (MIFARE) for authorisation per user, alternatively via the backend.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid-friendly control:\u003c\/strong\u003e input for the grid operator's ripple control receiver or control box; implementation under §14a EnWG (Germany) is clarified by your electrician with the grid operator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust:\u003c\/strong\u003e housing IP54 and IK10, DC residual current detection (6 mA) built in – an RCD type A in the distribution board is sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreen Edition:\u003c\/strong\u003e according to KEBA, the P30 Green Edition is a climate-friendly charging solution: since April 2022 KEBA has only manufactured CO₂-optimised wallboxes; for unavoidable emissions KEBA invests in selected, certified climate protection projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGood to know\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePV surplus with KEBA accessories:\u003c\/strong\u003e with the KEBA KeContact E10 (energy meter at the grid connection point) the P30 becomes a fully fledged PV wallbox – without any separate energy management. The wallbox continuously adjusts its charging power to the solar surplus. With the KEBA KeContact S10 it additionally switches automatically between three-phase and single-phase charging, so solar power ends up in the car even when there is little sun.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternatively:\u003c\/strong\u003e an external energy management system such as evcc that controls the wallbox via Modbus TCP or UDP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat:\u003c\/strong\u003e at 22 kW it operates from −25 to +40 °C, at 16 A up to +50 °C; in warm conditions it automatically reduces power. Avoid direct sunlight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBilling:\u003c\/strong\u003e for this you need a backend – we offer Smartfuelpass by Ultima Payments or Vaylens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e depending on the batch, the housing cover may carry a different print, e.g. kW-Solutions instead of KEBA. Technology and Eichrecht compliance are identical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22 kW:\u003c\/strong\u003e registration with the grid operator and usually its approval required (Germany: approval required above 12 kW). On site: RCD type A and miniature circuit breaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat does ME mean?\u003c\/h3\u003e\n\u003cp\u003eMess- und Eichrecht (measurement and calibration law): the metering is approved for reselling charging power to others – in Austria as well as in Germany. MID is sufficient for documenting your own costs (e.g. company car cost reimbursement); for tenants, co-owners, guests, customers or employees with private cars, Eichrecht is required.\u003c\/p\u003e\n\u003ch3\u003eHow many wallboxes can I connect?\u003c\/h3\u003e\n\u003cp\u003eOne P30 x-series controls up to 15 KEBA P30 c-series, i.e. 16 charging points on one connection.\u003c\/p\u003e\n\u003ch3\u003eCan I charge with PV surplus?\u003c\/h3\u003e\n\u003cp\u003eYes. The easiest way is with the KEBA KeContact E10 as an energy meter – then no additional energy management is needed; with the KEBA KeContact S10 you also get automatic switching between single- and three-phase charging. Alternatively via an energy management system such as evcc, which controls the wallbox via Modbus TCP or UDP.\u003c\/p\u003e\n\u003ch3\u003eDo I need a SIM card?\u003c\/h3\u003e\n\u003cp\u003eOnly if there is no LAN or Wi-Fi at the charging point – then a mini SIM from your provider.\u003c\/p\u003e\n\u003ch3\u003eHow long does a charge take?\u003c\/h3\u003e\n\u003cp\u003eAt 22 kW a car with a 60 kWh battery is full in around three hours, provided it can charge at 22 kW AC; at 11 kW in around six.\u003c\/p\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e122.117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType designation\u003c\/th\u003e\n\u003ctd\u003eKC-P30-EC2404E2-L0R-GE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e9120050714342\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003eup to 22 kW; 10, 13, 16, 20, 25 or 32 A; single- or three-phase, 230\/400 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eType 2 cable, 6 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eEichrecht-compliant (ME), AT and DE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCommunication\u003c\/th\u003e\n\u003ctd\u003eLAN (RJ45, LSA+), Wi-Fi 2.4 GHz, LTE Cat 1 (fallback 3G\/2G) with mini SIM, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtocols\u003c\/th\u003e\n\u003ctd\u003eOCPP 1.5 and 1.6, Modbus TCP, UDP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad management\u003c\/th\u003e\n\u003ctd\u003eMaster for up to 15 KEBA c-series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID (MIFARE), backend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eDC residual current detection 6 mA (RDC-DD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrid operator control\u003c\/th\u003e\n\u003ctd\u003eInput for ripple control receiver \/ control box (§14a EnWG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection rating\u003c\/th\u003e\n\u003ctd\u003eIP54, IK10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e−25 to +40 °C at 32 A, up to +50 °C at 16 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (H × W × D) \/ weight\u003c\/th\u003e\n\u003ctd\u003e643 × 240 × 142 mm, approx. 7.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eScope of delivery, downloads and accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScope of delivery: KEBA P30 x-series with 6 m cable, design cover with kW-Solutions branding, drilling template, instructions\u003c\/li\u003e\n\u003cli\u003eDownloads: \u003ca href=\"https:\/\/www.keba.com\/en\/emobility\/products\/x-series\/x-series\" rel=\"noopener\" target=\"_blank\"\u003eKEBA x-series product page\u003c\/a\u003e, \u003ca href=\"https:\/\/www.keba.com\/en\/emobility\/products\/green-edition\/\" rel=\"noopener\" target=\"_blank\"\u003eGreen Edition\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAccessories: KEBA KeContact E10 energy meter (63 A) for PV surplus charging, KEBA KeContact S10 phase switching device (single-\/three-phase)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Keba","offers":[{"title":"Default Title","offer_id":53379548053834,"sku":"1300","price":999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3623\/0218\/files\/kw-solutions-wallbox-kabel.png?v=1792051000"},{"product_id":"go-e-pro-cable-me","title":"go-e Charger PRO Cable ME – Eichrecht-compliant 11 kW wallbox with 6 m cable","description":"\u003cp\u003eThe go-e Charger PRO Cable ME is the version of the PRO that is compliant with Austrian and German calibration law (Eichrecht): for anyone who bills charging electricity to others – tenants, apartment owners, hotel guests, customers or employees for their private cars. MID-certified meter plus measurement and Eichrecht certification for Austria and Germany, permanently attached 6 m cable, LAN, Wi-Fi and LTE – Made in Austria.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003e11 kW (6–16 A), permanently limited to 11 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection to the car\u003c\/th\u003e\n\u003ctd\u003eType 2 cable, 6 m, permanently attached\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eMID class B, Eichrecht-compliant in Austria and Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eLAN, Wi-Fi, LTE (eSIM, 5 years included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID, app, OCPP 1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer's warranty, Made in Austria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eA good fit if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou bill charging electricity to tenants, a homeowners' association, guests or customers,\u003c\/li\u003e\n\u003cli\u003eyour energy supplier or charging electricity provider requires an Eichrecht-compliant wallbox,\u003c\/li\u003e\n\u003cli\u003eyou want to manage several charging points centrally via a portal or backend.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProbably not, if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou only need to document your own costs, for example for company car charging reimbursement – then the cheaper PRO Cable MID is all you need,\u003c\/li\u003e\n\u003cli\u003eyou need 22 kW – this version stays at 11 kW.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it can do\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEichrecht-compliant billing:\u003c\/strong\u003e MID-certified meter plus Eichrecht certification (AT, DE) – the metering holds up even when money changes hands for the electricity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEvery charge assigned:\u003c\/strong\u003e RFID reader, app authorisation or backend.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple connectivity:\u003c\/strong\u003e LAN, Wi-Fi and LTE via eSIM (free for at least 5 years).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral management:\u003c\/strong\u003e go-e Portal with RFID management, monitoring and billing-relevant data per station and user; OCPP 1.6 for common OCPP backends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScalable:\u003c\/strong\u003e static load management without an additional device, dynamic load management and solar surplus charging via the go-e Controller, OCPP, Modbus TCP or an energy management system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust:\u003c\/strong\u003e IP66, IK08, the 6 m cable reaches whether you park forwards, backwards or sideways.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid-friendly:\u003c\/strong\u003e 2 digital inputs, e.g. for the ripple control receiver (in Germany §14a EnWG).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGood to know\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBilling:\u003c\/strong\u003e Eichrecht-compliant metering is one half, billing is the other – for that you need a backend. We offer Smartfuelpass by Ultima Payments or Vaylens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed at 11 kW:\u003c\/strong\u003e permanently limited to 11 kW, cannot be upgraded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn site:\u003c\/strong\u003e at least a Type A RCD (30 mA) and a miniature circuit breaker, electrician for installation and registration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I really need the ME version?\u003c\/h3\u003e\u003cp\u003eYes, as soon as you bill charging electricity to others: tenants, apartment owners or a homeowners' association, guests, customers or employees for their private cars. In Austria, meters used in commercial transactions are subject to mandatory verification under calibration law (Eichrecht). MID is only sufficient for documenting your own costs, for example for company car charging reimbursement.\u003c\/p\u003e\n\u003ch3\u003eWho bills the charging sessions?\u003c\/h3\u003e\u003cp\u003eA backend that processes the meter readings in compliance with Eichrecht. We can set up Smartfuelpass or Vaylens for you – write to us at onlinesales@ampion.at.\u003c\/p\u003e\n\u003ch3\u003eCan I run several PROs on one connection?\u003c\/h3\u003e\u003cp\u003eYes, with static load management without an additional device, or dynamically with the go-e Controller or an energy management system.\u003c\/p\u003e\n\u003ch3\u003eDoes it also work without LAN?\u003c\/h3\u003e\u003cp\u003eYes, via Wi-Fi or the built-in eSIM.\u003c\/p\u003e\n\u003ch3\u003eHow long does a charge take?\u003c\/h3\u003e\u003cp\u003eAt 11 kW, a car with a 60 kWh battery is full in about six hours.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eCH-PRO-CABLE-ME-011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e9120087412600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003e11 kW, 6–16 A, switchable single-\/three-phase; cannot be upgraded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eType 2 cable, 6 m, permanently attached\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eMID class B, LED display, measurement and Eichrecht certification (AT, DE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCommunication\u003c\/th\u003e\n\u003ctd\u003eLAN 10\/100, Wi-Fi 2.4 GHz, LTE Cat-1 with eSIM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eOCPP 1.6 JSON, HTTP API, MQTT (Wi-Fi only), Modbus TCP (LAN or Wi-Fi); 2 digital inputs, 1 potential-free output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID 13.56 MHz, app, backend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eISO 15118\u003c\/th\u003e\n\u003ctd\u003eHardware prepared for ISO 15118; activation via software update according to go-e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eDC 6 mA \/ AC 20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection rating\u003c\/th\u003e\n\u003ctd\u003eIP66, IK08\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e−25 to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions \/ weight\u003c\/th\u003e\n\u003ctd\u003e18.6 × 29.7 × 9.9 cm, approx. 5.1 kg including cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer's warranty (terms: go-e warranty statement)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eScope of delivery, downloads and accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScope of delivery: go-e Charger PRO Cable ME, wall bracket, 1 RFID chip (pre-paired), quick start guide\u003c\/li\u003e\n\u003cli\u003eDownloads: \u003ca href=\"https:\/\/go-e.com\/fileadmin\/Support\/Anleitungen\/Deutsch\/go-e-charger-pro-datenblatt.pdf\" target=\"_blank\" rel=\"noopener\"\u003eData sheet\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0973\/3623\/0218\/files\/go-e-charger-pro-cable-quick-reference-guide.pdf?v=1775137299\" target=\"_blank\" rel=\"noopener\"\u003eQuick start guide\u003c\/a\u003e, \u003ca href=\"https:\/\/go-e.com\/de-at\/support\/anleitungen\" target=\"_blank\" rel=\"noopener\"\u003eAll manuals at go-e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAccessories: \u003ca href=\"\/en-it\/products\/go-e-stand-pro\"\u003ego-e Stand PRO\u003c\/a\u003e · \u003ca href=\"\/en-it\/products\/go-e-controller\"\u003ego-e Controller\u003c\/a\u003e · \u003ca href=\"\/en-it\/products\/rfid-tags-fur-go-e-charger-10-stk-packung\"\u003eRFID tags, pack of 10\u003c\/a\u003e – for tenants, guests or employees\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"go-e","offers":[{"title":"Titolo predefinito","offer_id":61506787901770,"sku":"9415","price":1321.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3623\/0218\/files\/CH-PRO-CABLE-ME-011_0_de-DE.jpg?v=1792052342"},{"product_id":"go-e-pro-cable-mid","title":"go-e Charger PRO Cable MID – 11 kW wallbox with MID-certified meter and 6 m cable","description":"\u003cp\u003eThe go-e Charger PRO Cable MID is the wallbox for anyone who charges a company car at home and bills their employer to the exact kWh: MID-certified meter with a display on the front, RFID assignment per driver and a permanently attached 6 m Type 2 cable. LAN, Wi-Fi and LTE ensure it is always reachable – Made in Austria.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003e11 kW (6–16 A), permanently limited to 11 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection to the car\u003c\/th\u003e\n\u003ctd\u003eType 2 cable, 6 m, permanently attached\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eMID class B with LED display on the front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eLAN, Wi-Fi, LTE (eSIM, 5 years included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID (10 users locally, unlimited via portal), app, OCPP 1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer's warranty, Made in Austria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eA good fit if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou charge a company car at home and your employer reimburses the electricity,\u003c\/li\u003e\n\u003cli\u003eyou charge company vehicles at your own site and need the consumption per vehicle,\u003c\/li\u003e\n\u003cli\u003eyou want a wallbox with network cable, Wi-Fi and mobile connectivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProbably not, if …\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eyou bill charging electricity to others (tenants, co-owners, guests, customers or employees for their private cars) – then you need the PRO Cable ME,\u003c\/li\u003e\n\u003cli\u003eyou want to upgrade to 22 kW later – this version stays at 11 kW,\u003c\/li\u003e\n\u003cli\u003eyou only charge privately without billing – then a Gemini is all you need.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it can do\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBilling to the kWh:\u003c\/strong\u003e MID-certified meter with LED display – consumption can be read on the front, in the app and in the backend.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEvery charge assigned:\u003c\/strong\u003e The built-in RFID reader assigns each charging session to a person or vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple connectivity:\u003c\/strong\u003e LAN (RJ45 or LSA), Wi-Fi and LTE via eSIM – free for at least 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasily manage many stations:\u003c\/strong\u003e via the free go-e Portal with RFID management, monitoring and billing-relevant data per station and user.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick to install:\u003c\/strong\u003e Wall bracket, supply cable from the back, bottom or top, clip on the charging unit – IP66 and IK08 for indoor and outdoor use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar surplus charging and load management:\u003c\/strong\u003e static without an additional device; dynamic and with solar power via the go-e Controller, OCPP, Modbus TCP, API or an energy management system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid-friendly:\u003c\/strong\u003e 2 digital inputs, e.g. for the ripple control receiver (in Germany §14a EnWG).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGood to know\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed at 11 kW:\u003c\/strong\u003e This version is permanently limited to 11 kW and cannot be upgraded to 22 kW.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTax (Austria):\u003c\/strong\u003e According to the Austrian Federal Ministry of Finance (BMF), company car charging reimbursement is tax-free if the amount charged can be verifiably assigned to the vehicle – the MID-certified meter and RFID provide this proof. For guidance only, not tax advice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn site:\u003c\/strong\u003e at least a Type A RCD (30 mA) and a miniature circuit breaker; installation and registration by an electrician. MQTT only works via Wi-Fi, Modbus TCP via LAN or Wi-Fi – neither over the mobile network.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs MID enough or do I need Eichrecht?\u003c\/h3\u003e\u003cp\u003eMID is enough if you are documenting your own costs: company car charging reimbursement from your employer, your own company fleet. As soon as you bill charging electricity to others – tenants, co-owners, guests, customers or employees for their private cars – you need a wallbox that is compliant with Austrian and German calibration law (Eichrecht): that's what the PRO Cable ME is for.\u003c\/p\u003e\n\u003ch3\u003eHow does my employer get the data?\u003c\/h3\u003e\u003cp\u003eVia the go-e app, the go-e Portal or your backend via OCPP; you can also see the meter reading directly on the front.\u003c\/p\u003e\n\u003ch3\u003eCan I pair additional RFID cards?\u003c\/h3\u003e\u003cp\u003eYes, up to 10 locally, unlimited via the go-e Portal or OCPP. One pre-paired chip is included.\u003c\/p\u003e\n\u003ch3\u003eCan I charge with solar surplus?\u003c\/h3\u003e\u003cp\u003eYes, with the go-e Controller, via OCPP, Modbus TCP, the open API or an energy management system.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eCH-PRO-CABLE-011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e9120087412570\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCharging power\u003c\/th\u003e\n\u003ctd\u003e11 kW, 6–16 A in 1 A steps, switchable single-\/three-phase; cannot be upgraded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eType 2 cable, 6 m, permanently attached\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eFixed connection, supply cable 3 × 1.5 to 5 × 10 mm², entry from top, bottom or back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter\u003c\/th\u003e\n\u003ctd\u003eMID class B, LED display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCommunication\u003c\/th\u003e\n\u003ctd\u003eLAN 10\/100 (RJ45 or LSA), Wi-Fi 2.4 GHz, LTE Cat-1 with eSIM (2G fallback)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInterfaces\u003c\/th\u003e\n\u003ctd\u003eOCPP 1.6 JSON, HTTP API, MQTT (Wi-Fi only), Modbus TCP (LAN or Wi-Fi); 2 digital inputs, 1 potential-free output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuthorisation\u003c\/th\u003e\n\u003ctd\u003eRFID 13.56 MHz, app, backend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eISO 15118\u003c\/th\u003e\n\u003ctd\u003eHardware prepared for ISO 15118; activation via software update according to go-e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eDC 6 mA \/ AC 20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection rating\u003c\/th\u003e\n\u003ctd\u003eIP66, IK08\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e−25 to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions \/ weight\u003c\/th\u003e\n\u003ctd\u003e18.6 × 29.7 × 9.9 cm, approx. 5.1 kg including cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer's warranty (terms: go-e warranty statement)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eScope of delivery, downloads and accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScope of delivery: go-e Charger PRO Cable MID, wall bracket, 1 RFID chip (pre-paired), quick start guide\u003c\/li\u003e\n\u003cli\u003eDownloads: \u003ca href=\"https:\/\/go-e.com\/fileadmin\/Support\/Anleitungen\/Deutsch\/go-e-charger-pro-datenblatt.pdf\" target=\"_blank\" rel=\"noopener\"\u003eData sheet\u003c\/a\u003e, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0973\/3623\/0218\/files\/go-e-charger-pro-cable-quick-reference-guide.pdf?v=1775137299\" target=\"_blank\" rel=\"noopener\"\u003eQuick start guide\u003c\/a\u003e, \u003ca href=\"https:\/\/go-e.com\/de-at\/support\/anleitungen\" target=\"_blank\" rel=\"noopener\"\u003eAll manuals at go-e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAccessories: \u003ca href=\"\/en-it\/products\/go-e-stand-pro\"\u003ego-e Stand PRO\u003c\/a\u003e (pedestal for one or two wallboxes) · \u003ca href=\"\/en-it\/products\/go-e-controller\"\u003ego-e Controller\u003c\/a\u003e · \u003ca href=\"\/en-it\/products\/rfid-tags-fur-go-e-charger-10-stk-packung\"\u003eRFID tags, pack of 10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"go-e","offers":[{"title":"Default Title","offer_id":61822200316234,"sku":"9410","price":1100.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3623\/0218\/files\/go-e-charger-pro-mit-kabel.png?v=1775137033"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/3623\/0218\/collections\/eren-goldman-mfqj3ZSs_h0-unsplash_1.jpg?v=1792033398","url":"https:\/\/e-leiwand.at\/en-it\/collections\/wallbox-eichrechtskonform.oembed","provider":"e-leiwand","version":"1.0","type":"link"}