go-e Charger Gemini flex 2.0 11 kW – portable wallbox with eSIM

The go-e Charger Gemini flex 2.0 11 kW is the portable wallbox for parking spaces without reliable Wi-Fi: a built-in eSIM keeps the app, updates and solar surplus charging with the go-e Controller online, even in an underground car park or at your holiday home – the go-e Controller itself needs an internet connection for this (LAN/Wi-Fi at the meter cabinet). It plugs into the red 16 A CEE socket – no electrician needed, and 5 years of mobile data are included.

At a glance

A good fit if …

• there is no Wi-Fi, or only a weak signal, at your parking space,
• you use the wallbox at several locations and don't want to set up Wi-Fi every time,
• you want to charge at the red 16 A socket without an electrician.

Probably not, if …

• your Wi-Fi at the parking space is stable – then the flex 11 kW is cheaper,
• you want to control solar surplus charging via a local energy management system using Modbus or MQTT and have no Wi-Fi,
• you want to use the wallbox in Norway.

What it can do

• Smart without Wi-Fi: eSIM with LTE (2G fallback), free for at least 5 years, then 12 euros per year; roaming in the EU, the UK, Switzerland and Liechtenstein.
• Remote support: Updates, remote diagnostics and troubleshooting run over the mobile network – if something goes wrong, we can take a look remotely.
• Plug in instead of installing: no mounting, no need to open the device; with adapters also at blue CEE or a household socket (Schuko).
• Charge for less: Charging timer, dynamic electricity tariffs, solar surplus charging with the go-e Controller – even without Wi-Fi at the wallbox; the go-e Controller itself needs an internet connection for this (LAN/Wi-Fi at the meter cabinet).
• Safe: DC fault current protection (6 mA DC, 20 mA AC), IP65, IK08.

Good to know

• Built-in eSIM: cannot be replaced; the LTE connection can be switched on and off in the app.
• Local interfaces via Wi-Fi only: MQTT and Modbus TCP do not work over the mobile network.
• Charging cable: not included. Protection: Type A RCD and miniature circuit breaker on the socket.
• Countries: The flex 2.0 may not be used in Norway, and the adapters are not permitted in Switzerland.
• Grid registration: According to go-e, in Germany even a portable wallbox must be registered with the grid operator. In Austria, check with your grid operator whether they require a notification.

Frequently asked questions

How much does the mobile data cost?

Nothing for at least 5 years, then 12 euros per year.

Do I still need Wi-Fi?

Not at the wallbox. The app and updates work via the eSIM; the go-e Controller itself needs an internet connection (LAN/Wi-Fi at the meter cabinet). Local interfaces such as Modbus TCP require Wi-Fi.

What is the difference from the flex 11 kW?

The eSIM. Charging power and operation are the same. If you have stable Wi-Fi at your parking space, the cheaper flex is all you need.

How long does a charge take?

At 11 kW, a car with a 60 kWh battery is full in about six hours.

Technical specifications

Scope of delivery, downloads and accessories

• Scope of delivery: Gemini flex 2.0 11 kW, wall bracket, RFID chip, quick start guide
• Downloads: Data sheet, User manuals at go-e
• Accessories: Weidmüller Type 2 charging cable · go-e Controller · Adapter blue CEE 16 A, household plug or adapter set · go-e Case · RFID tags